Made with the original DayGlo fluorescent pigments, our premium 215 and SRX brushing paints are created to excel in surroundings where maximum visibility is crucial. This includes a host of safety applications, such as aviation and traffic control, use on boats and buoys, safety markings, and sporting events markings.
These premium oil-based and water-based DayGlo fluorescent paints are also incredibly striking when used for outdoor advertising, store signs or trade exhibits. For maximum lightfastness and film integrity we advise pairing them with our Filteray® clear overcoat.
High Quality
High Quality
1/4”-3/8”
1/4”-3/8”
.013”-.017” Tip
60 mesh filter
1,400-2,400 psi
.013”-.017” Tip
60 mesh filter
1,400-2,400 psi
2 coats recommended
2 coats recommended
Rough: 350-400 sq. ft.
Smooth: 500-550 sq. ft.
Rough: 350-400 sq. ft.
Smooth: 500-550 sq. ft.
2-4 Hr Dry to Touch
4-8 Hr Recoat
2-4 Hr Dry to Touch
4-8 Hr Recoat
Soap & Water
Soap & Water
Stir well. If thinning is necessary, use water, but be careful to avoid over thinning.
Using short strokes, apply one heavy coat of DayGlo SRX latex paint with a soft brush. Cover completely and smooth out as you go to produce a uniform deep layer approximately 1.5 mils thick when dry. Keep in mind that thin spots or streaks will fade prematurely. Allow to set-up or ‘top-dry’ for at least 10 minutes at 70oF.
Apply a second coat the same as the first. Allow three hours to dry before applying Dayglo SRX Filteray W overcoat.
For sign applications, the DayGlo SRX coat can simply be roughed in, slightly overlapping the copy line. Your copy line will not be hidden because DayGlo SCR paint is semi-transparent. Do not try to work the paint exactly to a line.
An opaque background should be used to cut in accurately to the copy line for sharp detail after the DayGlo SRX paint has top dried for 24 hours.
